background image

START

Open Fuel Cock to start  

Turn Stop Switch to “I”(ON) position

Close Choke Lever

Pull Recoil Starter to start

Return Choke Lever to open

STOP

Return Throttle Lever fully until “O”(OFF) position to stop work   

After cooling down enough, stop the engine to move Stop Switch to “O”(OFF) position

Close Fuel Cock at the end

Starting, and stopping

31

㻰㻱㻯㻭㻸㻘㻌㻿㻱㼀㻌㻛㻹㼀㻌㻛㻱㼄㻼㻘㻌㻱㼁

Danger: poisonous exhaust gas

Carbon  monoxide  poisoning  may  occur  if 
the exhaust gas is inhaled. Do not operate 
the machine in a poorly ventilated area.     

Danger: The fall of the body

Take the utmost care not to allow the machine 
to fall during work, or when stopped or stored.

Be careful not to get hit by the plate.

During  operation,  don't  let  the  foot  of  the 
machine  come  too  close  to  your  foot. The 
plate may smash your foot.

Be careful not to get burned.

Accidental  burn  may  occur  if  you  touch  the 
hot parts (engine, muffler, etc.) during opera-
tion or immediately after the machine stops.

3DUWFRGH1R

㻰㻱㻯㻭㻸㻘㻌㻿㻱㼀㻌㻛㻹㼀㻌㻛㻱㼄㻼㻘㻌㻱㼁

Danger of hearing damage caused 
by noise

Always  use  ear  plugs  while  operating  the 
machine.

Refueling Hazard.

Don't  fill  the  fuel  tank  while  the  engine  is 
running or hot.

Danger of eye damage.

Always  use  eye  protection  while  operating 
the machine.

Fire hazard

Stop  the  engine  when  refueling.  Fire  may 
occur if a flame is near the tank fuel port.

Read the manual carefully.

Always read the operation manual and have 
good understanding of operation before your 
work. 

ջ

ձ

ղ

յ

մ

ն

ո

ճ

չ

պ

շ

Lifting  position.

For lifting, use only one point hoisting hook, 
and do not lift at any other part.

պ

Lifting by the handle is prohibited.

Due to a falling risk, do not lift the 
machine by the handle.

ջ

NPA-1472

NPA-1473

NPA-1474

NPA-1471

NPA-1470

NPA-1469

NPA-1468

4.9  Descriptions of symbols used on warning labels

7

Содержание MT-55

























Отзывы:

Похожие инструкции для MT-55