Mikado LOGO 200, Руководство пользователя

Страница: 2 / 18

Index
Introduction
Safety Instructions
Manual Logo 200 - ©Mikado Model Helicopters - Page 2
Safety Instructions/ Tools for Assembly & RC Equipment
Main Frame - Motor Mounting / Top Bearing Block
Main Frame - Top Frame Assembly
Main Frame - Lower Frame Assembly
Main Frame - Lower Frame Mounting
Main Frame - Landing Gear Mounting
Rotor Head - Bearing Installation
Rotor Head - Assembly
Rotor Head - Pitch Linkns / Mounting
Tail Motor Mounting
Tail Boom Mounting
Servo Mouting
Servo Linkaging
Vbar NEO mini - Wiring Diagram / Mounting
Main Blade Mounting
Tail Blade Mounting
Battery Mounting
Canopy Mounting
Model Overview
2-3
4
5
5
6
7
8
8
9
10
10
11
12
12
13
13
14
15
16-18
Thank you very much for your purchase of the Mikado LOGO 200. Prior to repairs, please read and understand this
manual completely and follow all instructions exactly. If any instructions are not clear to you or if you have any questions,
please contact us. You can reach Mikado on the LOGO-Forum on www.vstabi.info or contact the Mikado support hotline
via email or phone. Do not under any circumstances fly this helicopter if you are unsure of setup or assembly.
While this helicopter is great for beginners, it is still a high performance, dangerous and complex machine. It is expected
that you have some experience in assembling and operating an RC helicopters. You are required to adhere to the safety
instructions of this manual.
You must secure and check all screws in all components yourself. In addition, it is necessary that you secure all other
screwed connection,by which you will assemble the different components of the LOGO 200. We recommended to use
securing glue Loctite 243 (blue).
Please follow the recommendations of the Loctite manufacture and allow proper curing time for the Loctite prior to flying
the model.
RC Helicopters are not toys and must be treated with due diligence. If you do not use this helicopter responsibly it can
cause severe injury and immense damage. Inappropriate use of this product can result in injury or death. Each user
must have the appropriate knowledge and skill to operate any RC Helicopter.
Manufacturer / reseller assumes no liability for the use or operation of this helicopter. You are responsible for any injury
and damage that may be caused by this helicopter. It is recommended that your radio components be tested prior to
installing in this helicopter. Improper radio installation or inadequate battery voltage can result in the loss of control of the
helicopter. Proper knowledge of your radio equipment is required prior to flying this helicopter. You must check if other
persons are using an RC-controlled model or device simultaneously, as this may result in interference. If the helicopter
behaves in an unusual or strange way, you must land it immediately and turn off the power. Please meticuously check all
of your radio gear and find/fix the problem before you continue to operate the helicopter. This is to avoid any accidents.
Since one irregularity can cause other defects or problem, if the problem is not fixed first, an increased risk of failure will
ensue.