Mikado LOGO 20, Руководство пользователя

Страница: 9 / 68

Manual LOGO 20 Page 9 ©Mikado Modellhubschrauber
2x M3 #2072
2x M3x8 #1915
2x M3x12 #1964
2x 3x7x0,5 #2012
#2499
3 Motor Installation
3 Motor Installation
Bag 1• Bag 12
Some electric motors are construc-
ted such that they cannot be moved
along the motor plate. If you are using
one of these motors, please use the
motor adaptor plate #2499. The plate
is not needed for Hacker motors.
Please check from the Mikado
website which pinion works best with
the motorset you have (on the Mika-
do webpage go to LOGO 10 and click
“Motorization”). When a wrong pini-
on is used, the performance of your
electric helicopter will deteriorate and
the motor or speed controller can be
damaged.
Do not tighten the set screw fully
until the final position of the pinion on
the motor shaft is determined. This is
done after installing the main gear.
There are two options for attaching
the pinion:
1. For securing the pinion, you may
flatten the motor shaft where the set
screw meets the motor shaft - without
making a flat surface on the motor
shaft.
2. Alternatively, you may screw the
set screw directly onto the motor
shaft. For this it is required that the
set screw has an appropriate rim for
engaging in the motorshaft (all Mika-
do pinions have this rim). Note,
however, that after attaching the set
screw once, this rim becomes blunt
so that the screw may not be used
again.
Pinion not
included in kit