Cleaning of the Rice cooker
1. Disassembling
1. Turn left to remove a protective cover
Note: After each use it is necessary to
wash the inner cover and steam release
valve.
Open a latch, pull the gasket.
Open a steam release valve, pull the
latch to the side, open the valve, and
then remove the seal.
2. Assembling
Install the gasket, align, close up.
3. Under inner cover, you will see
the steam release valve, which
must be removed.
2. After a light pressing on a latch
inside of cover, it automatically
pops up. Remove the inner cover.
1. Hold the gasket in its groove,
align it, and then lightly press
down on the latch until you hear
a «click».
2. Accurately move the pair of release
valve on the steam outlet hole, and then
lightly pressing down, slowly insert it into
the installation location.
3. Insert a support ring of the inner lid in a special
slot in the rice cooker, slightly press down an inner
cover up until you hear a «click».
4. Insert a protective surface
along the fixing plate on a right
side.
Note: Steam release valve and
the inner cover must be set
differently or Rice cooker cover
will not close properly.
6
XIAOMI-MI.COM
