Personnel:
n
Trainer
Materials:
n
Latest update file
n
miha bodytec USB flash drive
Keep the device updated at all times.
1.
Save the relevant update file on the miha bodytec USB flash
drive.
2.
Remove the service cover with the help of a screwdriver.
3.
Insert the miha bodytec USB flash drive with the update file
into the USB port on the underside of the device (Fig. 32/1).
4.
Open the
“Setup”
menu tab.
ð
The
“Setup”
menu tab is opened.
5.
Use the multi-function button to select the
“Update”
menu
item and press the button to confirm your selection.
If the “Update” menu item has a gray background, the
update file on the miha bodytec USB stick is defective, or the
miha bodytec USB flash drive has not been fully inserted.
Ensure that the update file is valid and that the miha bodytec
USB flash drive is fully inserted.
ð
A prompt appears asking if you want to perform an
update.
6.
Answer the prompt with
“Yes”
.
ð
The update process starts. This can take several
minutes.
7.
Wait for the update, do not disconnect the power supply, and
do not switch off the device.
ð
After the update process is complete, you will see a
prompt to manually turn the device off and on again.
8.
Switch off the device.
9.
Remove the miha bodytec USB flash drive.
10.
Close the service cover with the help of a screwdriver.
11.
Switch on the device.
It takes approx. 17 seconds after the device has been
switched on before it is ready for use.
ð
The update is now complete and the device is ready for
use.
7.10 Using networks
The device is fitted with a Wi-Fi module so it can exchange data
with the miha bodytec LOGX portal.
Installing updates
1
1
Fig. 32: USB port
Wi-Fi
Customization and setup
2021-07-28
miha-bodytec m.ove EMS training device
70