Migomag ASIM200LCD, Руководство оператора

Страница: 20 / 46

Operators Manual
17
Based on different welding positions, there are different welding joints, see following images
for more information.
Connection to Electrical Mains Power Supply
The SIM 200 LCD is factory fitted with a 3 metre, 3 core 2.5mm2 Heavy Duty PVC
mains power supply cable with moulded 3 pin, 15 Amp, Single Phase plug.
A 15 Amp plug and socket is recognisable by a wide Earth pin. Power Supply authorities
require that equipment fitted with a 15 Amp plug shall ONLY be connected to a 240 Volt, 15
Amp power point. DO NOT modify the plug.
The minimum capacity of the mains wiring and power outlet supplying a welder is
selected according to the effective primary current of the equipment. The effective
primary current for the SIM 200 LCD is 15 Amps.
The minimum recommended mains circuit breaker rating for a SIM 200 LCD is
36 Amps. Note : Due to normal variations of sensitivity, the tripping time of some
36 Amp circuit breakers may limit the duty cycle available from the SIM
200 LCD. A higher rated circuit breaker can be selected, but the mains wiring capacity must
be rated to suit.