2
ASSEMBLY INSTRUCTIONS FOR THE SHOOTOUT HOOPS GAME
Please keep these instructions for future reference. Adult assembly required.
Tools / Parts required
This product requires 3x AA batteries (not included). Do not mix old & new batteries. Do not mix alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium) batteries.
Wrench (included)
Allen key (included)
10mm socket (included)
Small Philips screwdriver (not included)
Assembly Tips
Make sure you understand the following before you begin to assemble your HOOPs game.
1.
Some drawings or images in this manual may not look exactly like your product.
2.
You will need a second adult to assist with this assembly.
3.
Save all packing materials until the parts have been inspected & the HOOPS game is assembled.
Unpack the pieces
1.
Lay the box on a flat surface (the floor). You may want this near your area of assembly.
2.
Unpack the box & parts bags. Inspect & count the parts. The Parts List page can be used to record your
results.
3.
Some parts on the Parts List page are pre-assembled (P1-P3).
4.
If any parts are missing please contact Mightymast Leisure immediately.
Step 1
Attach the Board Tubes #2 to the Left Tube #3 & Right Tube #4 using the spring lock as shown in Figure 1. Attach the
Support Tubes #7 to the Mounting Tube #6 & #8 using the spring lock as shown in Figure 2.
