3
Then starting from the blue score counters end of the table insert the poles as follows:
-
Blue 1-man pole
-
Blue 2-man pole
-
Red 3-man pole
-
Blue 5-man pole
-
Red 5-man pole
-
Blue 3-man pole
-
Red 2-man pole
-
Red 1-man pole
There should now be 4 poles on each side of the table with the blue & red teams facing each other.
Refer to the picture on the front of these instructions to check the correct player formation.
4. Now fit the pole bearings as shown in the diagram below. At both ends of the poles fit 2 half moon
bearings with legs to the inside of the table & then 2 half moon bearings without legs to the outside
of the table. Secure with 1 screw. Finally hammer on the handles to the end of the poles. Now fit the
black pole studs to the other end of the poles.
