“Make It Once...Make It Mighton...”
www.mightonproducts.com
Mighton Products Ltd,
Hinxton, Cambridgeshire CB10 1RG 01223 497097 [email protected]
E-Key Pairing and Operation
Resetting MightyLock
The E-Key
(I)
can be used as an external emergency power supply for MightyLock
(A)
.
It can also be paired with MightyLock
(A)
which will allow the E-Key to unlock the door simply by
pressing the Open Button on the E-Key. You can pair up to 5 E-Key’s with each MightyLock.
If you lose or forget the master code, you will need to completely reset MightyLock
(A)
. Doing this will
delete all user entry codes. The master code will reset to default
*000000#
.
Resetting MightyLock:
Open the back cover on the inside handle of MightyLock
(A)
, press and hold the Set Button on the
Handle Power Pack
(E)
until MightLock beeps three times. MightyLock has now been reset to factory
settings, the master code is
*000000#
.
Using the E-Key as emergency power supply:
Insert the E-Key
(I)
into the MightyLock
(A)
E-Key Port. The MightyLock keypad will light up, you can
now unlock the door using your user entry or master code.
Pairing an E-Key with MightyLock:
Insert the E-Key
(I)
into the MightyLock
(A)
E-Key Port. Open the back cover on the inside handle of
MightyLock
(A)
, press the E-Key Pairing Button on the Handle Power Pack
(E)
the keypad will light up
red, now press the E-Key
(I)
Open Button twice, the keypad will flash three times. Press the E-Key
(I)
Open Button and confirm the door unlocks.
Unlock MightyLock using a paired E-Key:
Insert the E-Key
(I)
into the MightyLock
(A)
E-Key Port, press the E-Key
(I)
Open Button once, the door
will now unlock. Open the door and then remove the E-Key
(I)
.
Unpair an E-Key with MightyLock:
Insert the E-Key
(I)
into the MightyLock
(A)
E-Key Port. Open the back cover on the inside handle of
MightyLock
(A)
, press the E-Key Pairing Button on the Handle Power Pack
(E)
the keypad will light up
red, now press the E-Key
(I)
Open Button once, after a few seconds the keypad will flash once.
Press the E-Key
(I)
Open Button and check the door does not unlock.
5–6
7–8
9–0
3–4
1–2
*
#
Ekey
Set
5–6
7–8
9–0
3–4
1–2
*
#
Ekey
Set
5–6
7–8
9–0
3–4
1–2
*
#
Ekey
Set
I
A
Open Button
E-Key Pairing Button
Set Button
E-Key Port
E
