Stepless setting of wire feed speed
Control knob for setting the wire feed speed
between 1 and 15 m/min. If set in left position when
the machine is connected to a Dialog torch, the wire
feed speed is set from the torch handle (remote
control).
Reversing switch (only DUO)
Switch for choice of torch 1 or 2 (1 = wire feed unit in
left side, 2 = wire feed unit in right side).
Main switch
Main switch for on/off position and choice of low or
high voltage range.
Step switch for welding voltage
For machines with gas test. In "gas test" position, gas
flow will open when the torch trigger is activated.
7
9
10
8
501
13709
Connection of torch 1
Connection of aircooled torch to wire feed unit in left
side.
Connection of torch 2
Connectin of aircooled torch to wire feed unit in right
side.
Inductance outlets
By connecting the earth cable to the left outlet, the
machine is optimized to welding with solid wire (Fe).
If the earth cable is connected to the right outlet, the
machine is optimized to MIG brazing or welding with
special wires.
11
13
12
13
11
12
7
8
9
10
MULTIMOTIVE 220-221
MULTIMOTIVE 220-221 DUO
10
7
9
