Migatronic 82031200 Скачать руководство пользователя страница 6

6

MigaVent Mini

3.   General description

 

High vacuum filter unit consisting of built-together 
turbine, filter element and dust container. Application 
for extraction of welding smoke and dry dust.

4.   Function

 

Process air leads into the unit at (A) and passes dust 
container and filter element. The air leaves the unit 
at (B), where outlet hose is mounted.

4.1.  Daily maintenance

 

Empty the dust container every day. Do not fill the 
dust container beyond the lower edge of the filter 
element.

 

At the same time, brush off the filter element.

 

Clean the cooling air filter every week and always 
after work in very dusty environment.

 

Check that cable and plug are intact.

5.   Unit condition during operation

 

Inlet and outlet hoses must be mounted during 
operation.

 

Use the high vacuum unit type 

MigaVent Mini

 only in 

upright position and with all locking devices locked..

6.  Intentional/Unintentional use

 

Use the 

MigaVent Mini

 for extracting welding smoke 

without sparks only, not for direct extraction from 
e.g. grinding.

 

Do not use the unit in ATEX environment!

7.   Mounting

 The 

MigaVent Mini

 is pre-assembled on delivery.

7.1  Electrical connection

 

Connect the 

MigaVent Mini 

by a plug that conforms 

to local power supply.

 

1 x 230V + earth

 

Do not use the unit without earth connection.

 

Consumption: 1,200W

8.   Noise level

 

Noise level: 73 dB(A)

9. Maintenance

 

Unplug the unit prior to carrying out maintenance.

 

Check electric equipment every three months and use only 
original parts for any repair.

 

Check packings and exchange them, if necessary.

9.1   Filter cleaning

 

Remove the filter for air intake and clean it. Take out the 
filter element by removing the wing screw at the bottom 
of the filter and clean it. If you use compressed air for 
cleaning, carry out cleaning in a booth.

 

The filter element is not washable.

 

If the filter element is leaky, exchange it. 

 

Please note: Limited service life of active carbon and 
turbine.

9.2   Spare parts

 

Filter element: item number 82031205.

10.   After maintenance

 

Test the 

MigaVent Mini 

following the maintenance.

A

B

Max. 13A fuse

Содержание 82031200











Отзывы: