12
After opening the power of the MIG – 630C series, and during the system’s
startup, the boot interface will be displayed on the left of the front panel LCD
screen. After the start up, the screen will show the current state of the
machine as shown below:
There is a total of four aspects in the figure above, described as follows:
number of
rows
Explanation
First Row
The main output channel shows the input signal channel, the
signal type and its resolution.
Second Row
Pre-monitoring channel displays the input signal channel, the
signal type and its resolution.
Third Row
Pre-monitoring double-channel display shows the input signal
channel, signal type and its resolution.
Fourth Row
Resolution of three-channel output.
Note: #+figure, indicate No. of each input port, corresponding to the No. Of
the rear panel.
Non-Menu State introduction
Prog
Output Resolution
：
1920x1080 60Hz
Pre1
Pre2
#1
VGA
1920x1080 60Hz
#2
#7
VGA
DVI
1920x1080
No signal
60Hz
