Preparing for Use
22
21
2. The Lap Belt Guides should be adjusted into the
position nearest to, but not touching the sides of
the child’s thighs.
To adjust width of Lap Belt Guides:
a. Pull out and hold Lap Belt
Guide Adjustment Button
and slide Lap Belt
Guide out to the maximum
position . Release Lap
Belt Guide Adjustment
Button.
Repeat on opposite side.
b. Adjust to fit child.
1. Place Booster Seat
with Lap Belt Guides
extended
on
vehicle
seat.
2. With child sitting on
the
Booster
Seat,
slide Belt Lap Guide
into
the
position
nearest to, but not
touching
child’s
thigh .
3. Pull out on Lap Belt
Guide to check it is
locked into position .
4. Repeat on opposite
side.
1
1
2
2
4
3
3
4
4
1. Unfold and place Booster
Seat on vehicle seat in a
seating location that has
a Vehicle Lap and Shoulder
Belt.
2. Adjust Lap Belt Guides into
postion for child. See
“Preparation For Use”
section.
3. Slide Booster Seat back
on vehicle seat cushion so
that the back of the Booster
Seat makes contact with
vehicle seat back cushion.
•
DO NOT use Booster Seat in a seating position
that has a Vehicle Lap Belt ONLY.
•
Vehicle Lap and Shoulder Belt MUST be snugly
adjusted around child.
•
Vehicle Lap Belt MUST be positioned low on hips,
contacting thighs and not up on the abdomen.
•
Vehicle Shoulder Belt MUST be over child’s chest
and centered on shoulder. DO NOT allow child to
place Shoulder Belt under arm or behind back.
•
NEVER use Booster Seat with only a Lap Belt
across front of child. Use of Lap Belt ONLY can
result in serious injury or death.
WARNING
DEATH or SERIOUS INJURY can
occur
Securing Child on Booster Seat
24
23
1036 IM Rev D-US EN 060216 Web Pages.indd 7
6/2/16 4:18 PM
