Mifold Grab-and-Go Booster, Руководство пользователя

Страница: 11 / 26

10
A note about switchable retractors:
Many vehicles have a lap and shoulder belt
system in which the retractor can be switched
from the emergency locking mode (ELR) to an
automatic locking mode (ALR). The ALR mode
is not designed for use with booster car seats
and mifold is not recommended for use with a lap
and shoulder belt in the ALR mode.
Note: Should the lap and shoulder belt
inadvertently be switched into the automatic
locking retractor mode (ALR) and the vehicle
seat belt is locked, follow the steps below to
remove the lap belt.
1 . Pull out and hold the shoulder belt to prevent further
retraction. Be aware not to allow shoulder belt
webbing to retract during this entire procedure.
2 . Have your child lean away from the vehicle buckle.
3 . Lift mifold up on the buckle side and remove lap belt.
If the lap and shoulder belt is inadvertently switched into
the locking mode, see steps on page 17 to r emove child.
Note About Switchable Retractors