Device Installation:
Special Note:
The device should be placed directly under a thick panel to maximize
it’s performance and protect it from external elements.
Heavy Duty JBUS Connection:
Fig. 2
Fig. 1
1. Connect (Fig. 2)
2. Install Location
Locate an installation location for placement of the MiFleet hardware.
Place the tracking device in line of sight. Do not place under metal
or adhere to the sub-frame chassis; this will cause interference.
DEVICE BARCODE MUST FACE THE SKY. For large commercial vehicles
and trucks, we recommend fixing the device to the dashboard or
glovebox. For a smaller compact vehicle, we recommend the same
location as well as against the dashboard on the back window.
*To prevent the unit from moving or falling it is recommended
to use a zip tie to securely fasten the device to the vehicle sub
frame. This is important so the MiFleet Device can accurately
gauge and report acceleration-based events.
3. Test Functionality
To complete installation, all vehicles should validate the Ignition ON/
OFF functionality on the MiFleet software platform. If the Platform
does not report/show ignition changes please have the installer
verify the wire connections and/or proceed to call MiFleet support for
questions and troubleshooting steps.
