• When a monitored location is more than 1000’ away, the DA-660 is the perfect
accessory for the DA-600 or DA-605P wireless Drive-Alert Vehicle Detection
Systems.
• This antenna boosts the normal Drive-Alert range up to 1/2-mile
• The antenna measures 36” long, 13” wide, and 1.5” high.
• It weighs approximately 1 pound.
• This is a FACTORY INSTALLED ACCESSORY due to the fact that some
components must be changed on the control panel for long range applications
• When ordering you must specify which Drive-Alert model you will be using and
add “LR” to the end of the part number. Example: DA-600LR or DA-605PLR will
be a complete system with the DA-660 Booster Antenna included
• Retro-fits must be shipped back to Mier Products for installation of the
components needed for the long range antenna
STAY CLEAR OF POWER LINES WHEN INSTALLING!
The antenna is equipped with clamps at the rear of the antenna for mounting to one
inch mast pipe. One inch schedule 40 PVC pipe works well for a mast. Removing
the end of the clamps allow mounting on a flat surface. The antenna can also be
mounted indoors such as an attic space. Simply lay the antenna across the rafters.
For maximum range and best reception of the transmitter/sensor the antenna should
be pointed at the signal source. The mounting clamps are the back of the antenna.
The connecting coaxial cable should be securely fastened to the antenna connector
and clamped to the boom with the cable wire tie supplied. Use standard 75 Ohm
TV cable, RG-6/U, available at many home stores. If used outdoors, wrapping the
connector with black plastic tape will give many years of use. Connect the other
end of the cable to the control panel.
After mounting and connecting the antenna, turn on the DA-610 transmitter/sensor
in the vicinity of the control panel to check that the system is working properly. If
the system is responding correctly, the DA-610 can be mounted in the desired
location on the drive.
DA-660
The DA-660 pictured here is mounted on a
pole. The antenna may be mounted
indoors or outdoors. Typically, it is mount-
ed hidden inside the attic of a home or
business.
Specifications:
Weight - 1.2 lbs.
Length - 36 inches
Width - 13 inches
Height - 1.5 inches
Frequency - 434 mHz
Impedance - 75 Ohms
Gain - 10.6 dB
Type - 7 element Yagi
The DA-660 is the perfect option for
monitoring remote buildings or equipment
up to 1/2 mile away.
Please contact us with any product, tech support, or installation questions.
Don’t forget to check out our website for cut-sheets, installation manuals, and
information on more products!
This Factory Installed Option
works with any Wireless Drive-Alert Model
DA-600
DA-605P
DA-660 Reception Booster Antenna
9
