Mienta SI18303A, Инструкция по эксплуатации

Страница: 5 / 24

USING AS A STEAM IRON
1. Fill the water tank as described above.
2. Stand the appliance on its bottom cover.
3. Plug the appliance in and switch on.
4. Set the temperature control knob to the steam position and the indicator light will
illuminate.
5. In this setting, the iron can be used as a steam iron when the indicator light goes out. The
light will illuminate and go out regularly during ironing as a indication that the temperature
control is working properly.
6. Turn the Steam Control knob to the Steam position (as below picture) will create steam.
Turn the Steam Control knob to the position 0, the steam will cease.
7. When finished ironing, please turn the temperature
control to “min” position and turn the steam control
knob to “0” position, and unplug.
USING AS A DRY IRON
1. Stand the iron on the bottom cover, then plug the iron in.
2. Turn the Steam Control knob to “0”.
3. Adjust the temperature control knob to the proper temperature.
When the indicator light goes out, it indicates the iron has reached the required temperature.
USING THE STEAM BURST BUTTON
Be sure there is water in the tank and the iron is on a high temperature setting.
1. Using the iron Horizontally
Lift the iron and press the steam burst button. You may need to press the button few times
after filling with water to activate the pump. The burst steam facility can be used only while
ironing with high ironing temperature (from to / Max).
2. Using the iron Vertically
The burst function can be also used when the iron is held in vertical position to remove
creases from hanging clothes, curtains, etc…
USING THE SPRAY BUTTON
As long as there is enough water in the water tank, you may use spray button at any
temperature setting either on Steam or Dry ironing. Press the button several times to activate
the pump while you are ironing.
5
Instruction Manual
•• •••