8 Instruction Manual
OPERATION INSTRUCTIONS:
This microwave oven uses modern electronic control to adjust the cooking parameters to meet
your needs for better cooking.
1. Clock Setting:
When the microwave oven is electrified, the screen will display “0:00”, buzzer will ring once.
1. Turn the “Multi-function switch” to “Clock”, the hour figure will flash.
2. Turn the “Digital switch” to adjust the hour figures, the input time should be within 0—23.
3. Press “Start/+30 sec.” to confirm, the minute figures will flash.
4. Turn the Digital switch to adjust the minute figures, the input time should be within 0—59.
5. Press “Start/+30 sec.” to finish the clock setting, “:” will flash.
Note:
1) The clock will not work if it is not set when the microwave oven is powered.
2) During the process of clock setting, if you do not press “Start/+30 sec.” to confirm in
1 minute, the oven will go back to the previous status automatically.
2. Microwave Cooking:
Turn the “Multi-function switch” to “200W”, “300W”, …….,”800W” and “P200”, “P300”
…., “P800” will display on the screen respectively. Then turn the “Digital switch” to enter the
cooking time, the maximum time cooking is 95 minutes. Then press “Start/+30Sec.” to start
the cooking process.
Example: If you want to use the microwave power on 500W to cook for 20 minutes, you
can operate the oven as the following steps:
1. Turn the “Multi-function switch” to “500W” and the screen will display “P500”.
2. Turn the “Digital switch” to adjust the cooking time until the oven display “20:00”.
3. Press “Start/+30Sec.” to start the cooking process and the buzzer sounds once.
4. When the cooking process is finished, the screen will display the current time.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
.
Microwave Power 200W 300W 400W 500W 600W 700W 800W
Display P200 P300 P400 P500 P600 P700 P800
