Mienta EK20720A, Инструкция по эксплуатации

Страница: 4 / 16

4
In st ru ct io n M an u al
OPERATING INSTRUCTIONS
COMPONENTS:
Using your appliance
Cleaning and Maintenance
Plug the kettle in the electricity wall socket.
Fill the kettle with water and place it level on the base so that contact is established
with the power connection.
Switch on the kettle using the ON/OFF switch. The kettle cannot be switched ON if it is
not properly seated on the base.
Do not fill the kettle with more than 1.7L, but do fill it with at least 0.5L of water.
The kettle is automatically switched OFF when the water boils. However, it can also be
turned ON and OFF at any time with the ON/OFF switch.
After an adequate cooling- off period, the water can once again be brought to a boil by
turning ON the switch.
The kettle can be taken off the base when the switch is in the OFF setting.
Always disconnect the plug from the wall socket before cleaning the kettle and the base.
Wipe the kettle and base with a moist cloth and a drop of washing liquid.
Never use an abrasive material or steel wool as these may damage the surface.
Descale the kettle regularly, possibly once a week, depending on the hardness of the
water and the frequency of use. Scale diminishes the heating performance of the kettle.
To descale, Fill 200ml with water and as much of vinegar. Bring to a boil and then leave
it to stand overnight. Next day pour away and fill the kettle with fresh water and bring to a
boil again. This water must also be poured away.
Normal commercial descales for kettles can also be used. Follow the instructions for the
respective descale material.
•
•
•
•
•
•
•
•
•
•
•
•
•
Before using your appliance, you must familiarize yourself with the different components of it.
Every number corresponds to one of the components of your appliance
Please read these operating instructions carefully and keep them in a safe place. Before
using the kettle for the first time, fill it with water, bring it to a boil and then pour it away.
Repeat this process two or three times. Use only water without any additives.
Before the first use
1.Spout
2.Base
3.Lid
4.Lid release button
5.Handle
6.Water level indicator
7.ON/OFF switch
5
1
6
3
4
7
2