Miele WWG 660, Руководство по эксплуатации

Страница: 93 / 104

Settings
93
Maximum rinse level
Important for allergy sufferers as an
excellent rinsing result is achieved.
The water level in the rinse cycles can
be permanently set to the highest value.
The water consumption will be
increased.
The maximum rinse level is deactivated
as standard.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down. Hot suds can damage
plastic drainage pipes.
Suds cooling takes place when the
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling must be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a laundry tub or trough.
– where the drainage pipes are rated
less than 70°C.
Suds cooling is deactivated as
standard.
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the programme will be
cancelled and the fault message
Water
intake. See  will appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the programme from being
cancelled.
Low water pressure is deactivated as
standard.
Anti-crease
The Anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The washing machine door
can be unlocked at any time by
touching the
Start / Add laundry sensor
and then opened.
Anti-crease is activated as standard.