Miele WWD 660, Руководство по эксплуатации

Страница: 50 / 96

Cleaning and care
50
Hygiene info
(Cleaning the drum)
Washing at low temperatures and/or us-
ing liquid detergent can cause bacteria
and unpleasant odours to build up in
the washing machine. Use the
Cottons
90 °C programme to clean the washing
machine. Clean the drum no later than
the point at which the
 indicator light
and

light up on the time display.
Cleaning the water inlet filter
The washing machine has 2 filters to
protect the inlet valve. Check these fil-
ters every 6 months or so. Perform this
check more often if there are frequent
interruptions to the external water sup-
ply.
Cleaning the filter in the inlet hose

First turn off the stopcock.
 Unscrew the inlet hose from the stop-
cock.

Remove the rubber seal 1 from the
recess.

Using pointed pliers, take hold of the
plastic filter slat
2 and remove the
plastic filter.
 Clean the filter.
 Reassemble in reverse order.
Cleaning the filter in the inlet valve

Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew it.
 Use pointed pliers to withdraw the
plastic filter by the slat.
 Clean the filter.
 Reassemble in reverse order.
The two filters must be put back in
place after cleaning.

Screw the screw connection securely
back onto the stopcock.

Open the stopcock.
Make sure there is no water leaking
from the threaded union.
Tighten the threaded union.