6. Program end – removing the laundry
27
Program end
The time display shows
0:00
. The
symbol will remain lit up in the
control panel. The door is locked in the
Anti-crease phase.
Touch the
Start/Stop
sensor button.
The door unlocks and the
symbol on
the control panel goes out.
Pull open the door.
Remove the laundry.
Energy savings
– 10 minutes after the beginning of the
Anti-crease phase, the indicators dim
and the
Start/Stop
sensor button
starts flashing.
– 15 minutes after completion of the
Anti-crease phase, the washing
machine switches off completely and
the door lock is released.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
Check the folds in the door seal for
any small articles.
Useful tip:
Leave the door slightly open
to allow the drum to dry.
Turn the program selector to the
position. This switches the
washing machine off.
If applicable, remove the used
capsule from the detergent dispenser
drawer.
Useful tip:
Leave the detergent
dispenser drawer slightly open to allow
it to dry.
Содержание WWB 020
Страница 54: ...54 ...
Страница 80: ...M Nr 11 003 030 00 en CA WWB 020 ...