Before the first use
29
6. Starting the calibration
programme
It is important to calibrate the washer-
dryer to ensure optimum water and
energy usage, as well as optimum
washing and drying results.
To do this, the
Cottons
programme
must
be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Turn on the tap and run the Cottons 90°C
programme without any laundry
Confirm with the
OK
sensor.
The display will then change to the
standard display for the
Cottons
programme.
11:02
90 °C
1600
1:57
Cottons
h
Washing
Temperature
Spin speed
TwinDos
Extras
not selected
Whites
Timer
Save
rpm
Turn on the tap.
Touch the
Start/Stop
sensor.
The calibration programme will start. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Set-up completed
Reach under the door grip and pull
the door open.
Useful tip:
For safety reasons, close the
door when the machine is not in use.
Otherwise there is a danger of objects
being placed inadvertently in the drum.
If these remain unnoticed and were
washed in the next load, they could
damage the laundry. An open door is
also a danger to pets and children.
Switch the washer-dryer off with the
sensor.
Содержание WTW 870 WPM
Страница 126: ......
Страница 128: ...M Nr 11 976 031 01 en AU NZ WTW 870 WPM ...