Before using for the first time
18
Setting up Miele@home
There are 2 ways of connecting:
1. Via the Miele@mobile app (default)
2. Via WPS
Logging in via the Miele@mobile app
Turn the programme selector to the
MobileStart
programme.
appears on the time display. The
timeout then starts to count down from
10 minutes on the time display.
The Miele@mobile app will guide you
through the remaining steps.
When you have successfully connected,
will appear on the time display.
Logging in via WPS
Turn the programme selector to the
MobileStart
programme.
Touch the
sensor control until
appears on the time display and a
short keypad tone sounds.
The timeout then starts to count down
from 2 minutes on the time display.
When you have successfully connected,
will appear on the time display.
Tip:
If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
Running the first wash pro-
gramme
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washer-dryer
and to adjacent cabinetry or appli-
ances.
Remove the transit bars as described
in “Installation”.
Before first use, the
Cottons
pro-
gramme must be run without laundry
and without detergent.
Open the stopcock.
Turn the programme selector to
Cot-
tons
.
The washer-dryer is switched on and
the temperature 40 °C lights up in the
control field.
Touch the
Start/Add laundry
sensor
control.
The wash programme will start.
After 10 minutes, the indicators dim,
except for the
Start/Add laundry
sensor control.