Miele WT 2670 Скачать руководство пользователя страница 50

Страница: 50 / 84

Fault messages in the display

Message in the display

Possible cause

Remedy

Drain
fault

–

The water outlet is
blocked or
restricted.

–

The drain hose has
been fixed too high.

–

Clean the drain filter and
the drain pump as
described in "Opening
the drum door in the
event of a blocked drain
outlet and/or power
failure".

–

The maximum drain
height is 1 m.

Inlet
fault

–

The water inlet is
blocked or
restricted.

Check whether

–

the stopcock is opened
wide enough.

–

the inlet hose is kinked.

WPS
activated

The water protection
system has reacted.

Call the Service
Department.

Drum lighting
fault

The drum lighting unit
is not fitted correctly.

Fit it correctly.

Technical fault
Call the Service
Department

There is a fault.

Start the programme again.
If the fault message
appears again, contact the
Service Department.

To switch off the fault message: Switch the machine off with the

I-On/0-Off

button.

Problem solving guide

Содержание WT 2670





















































































Результаты поиска

Содержание WT 2670

Отзывы:

Miele WT 2670, Руководство по эксплуатации, Страница: 50 / 84

Результаты поиска

Содержание WT 2670

Отзывы: