manualshive.com logo in svg

Miele WED 665 Excellence, Руководство по эксплуатации, Страница: 51 / 96

Поделиться
Скачать
Miele WED 665 Excellence Скачать руководство пользователя страница 51

Cleaning and care

51

TwinDos maintenance

Damage resulting from dried

laundry detergent.
If the system has not been used for a
long time (more than two months),
detergent in the hoses can become
viscous or dry out. The hoses can
become blocked and would then
need to be cleaned by a service
technician.
Clean the TwinDos system.

To clean the system, you need a
“TwinDosCare” cleaning cartridge,
which is available
from  www.shop.miele.com.

The washing machine has a cleaning
programme for the TwinDos system.
Running the cleaning programme will
clean the hoses inside the washing ma-
chine.

Starting the maintenance programme

The maintenance programme can be
started for compartment 

 and com-

partment 

 using the 



 program-

mable function.

Accessing the programming level

Prerequisites:

- The washing machine is switched on

(the programme selector is pointing
to a wash programme).

- The washing machine door is open.

Touch the 

Start

/

Add laundry

 sensor

control and hold it down while carry-
ing out steps 

 and 

.

Close the washing machine door.

Wait until the 

Start

/

Add laundry

 sensor

control lights up constantly ...

... and then release the 

Start

/

Add

laundry

 sensor control.

After approximately 4 seconds, 



 will

light up on the time display.

Touch the 

 or 

 

 sensor control un-

til 



 appears on the time display.

Confirm with the 

Start

/

Add laundry

sensor control.



 will light up on the time display.

Touch the 

 sensor control.



 will light up on the time display.

Confirm with the 

Start

/

Add laundry

sensor control.



 will flash on the time display.

Push the cleaning cartridge into com-
partment 

.

Confirm with the 

Start

/

Add laundry

sensor control.

Compartment 

 is cleaned.

Tip: 

To clean compartment 

, proceed

in the same way as with compartment

, but press the 

 sensor control twice

in step 

. 



 will light up on the time

display.

Cleaning the compartment

Detergent residue can cause clogging.

Use a damp cloth to clean the com-
partment interior when you change
the cartridges.

Содержание WED 665 Excellence

































































































Отзывы:

Нет отзывов