manualshive.com logo in svg

Miele WDB 038 WPS Active Eco, Руководство по эксплуатации, Страница: 27 / 84

Поделиться
Скачать
Miele WDB 038 WPS Active Eco Скачать руководство пользователя страница 27

6. End of programme - unload the drum

27

End of programme

The time display shows 

0:00

. The 

symbol will remain lit up in the control
panel. The door is locked in the anti-
crease phase.

Touch the 

Start/Stop

 sensor.

The door will unlock and the symbol 

appears in the control panel.

Pull open the door.

Remove the laundry.

Energy savings

– Ten minutes after the beginning of the

anti-crease phase, the indicators dim
and the 

Start/Stop

 sensor starts

flashing.

– Fifteen minutes after completion of

the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.

Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Check that all items have been re-
moved from the drum!

Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.

Tip: 

Leave the door slightly open to al-

low the drum to dry.

Turn the programme selector to the 

position. This switches the washing
machine off.

If applicable, remove the used cap-
sule from the detergent dispensing
drawer.

Tip: 

Leave the detergent dispenser

drawer slightly open to allow it to dry.

Содержание WDB 038 WPS Active Eco





















































































Отзывы:

Нет отзывов