manualshive.com logo in svg

Miele WDB 030, Руководство по эксплуатации, Страница: 71 / 80

Поделиться
Скачать
Miele WDB 030 Скачать руководство пользователя страница 71

Programmable functions

71



 Keypad tone

Each touch of a sensor is confirmed
with an audible tone.

Options



= Keypad tone switched off



= Keypad tone switched on

(factory default setting)



 Lock code

The lock code prevents the washing
machine being used without your
knowledge.

When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.

Options



= Lock code switched off 

(fact-

ory default setting)



= Lock code is switched on

Using the washing machine with a
lock code

The code is 

125

 and cannot be altered.

Switch on the washing machine.

  

 appears in the time display and

the 

 and 

 sensors light up.

Touch the 

 sensor.

 

 

 appears in the time display.

Confirm the number with the 

Start/

Stop

 sensor.

The first number was saved and you
can now enter the second number us-
ing the 

 and 

 sensors.

Also enter the second and third num-
bers and confirm the numbers with
the 

Start/Stop

 sensor.

The lock is released and a wash pro-
gramme can now be selected and star-
ted.

Содержание WDB 030

















































































Отзывы:

Нет отзывов