Miele WCI 320 страница 32 Скачать руководство пользователя

Страница: 32 / 92

6. Start the programme - the end of a programme

Starting a programme



Touch the flashing

Start/Stop

sensor.

The door will lock (



will appear in the

display to show this) and the
programme will start.

If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the
programme has started the programme
duration will appear in the time display.

Energy savings

After 10 minutes, the indicators dim.
The

Start/Stop

sensor flashes slowly.

To reactivate the indicators:



Touch the

Start/Stop

sensor (this

does not have any effect on a
programme that is running).

End of programme

The door is still locked during the Anti-
crease phase and the following will
appear alternately in the display:

Finish/Anti-crease











and

Press Stop button













Touch the

Start/Stop

sensor. The

door will unlock.



Pull open the door.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.



Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.

Tip:

Leave the door slightly open to

allow the drum to dry.



Turn the programme selector to the



position. This switches the

washing machine off.



If applicable, remove the used
capsule from the detergent
dispensing drawer.

Tip:

Leave the detergent dispenser

drawer slightly open to allow it to dry.

Содержание WCI 320





























































































Результаты поиска

Содержание WCI 320

Отзывы:

Похожие инструкции для WCI 320

Бренды по названию

Популярные бренды

Miele WCI 320, Руководство по эксплуатации

Результаты поиска

Содержание WCI 320

Отзывы:

Похожие инструкции для WCI 320

Бренды по названию

Популярные бренды