manualshive.com logo in svg

Miele WCH 360 SpeedCare 1600, Руководство по эксплуатации

Поделиться
Скачать
Miele WCH 360 SpeedCare 1600 Скачать руководство пользователя страница 51

Changing the programme sequence

51

Cancelling a programme

You can cancel a wash programme at
any time after it has started.

Touch the 

Start/Stop

 sensor.

The following will appear in the display:

Cancel programme

OK

Touch the 

OK

 sensor.

The suds will be pumped away. The fol-
lowing will appear in the display:

Prog. cancelled

OK

Wait until the door unlocks.

Pull open the door.

Remove the laundry.

Interrupting a programme

Turn the programme selector to the

 position.

The washing machine switches off.

To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.

Tip: 

If 

 

Cannot be changed

 appears in

the display, the programme selector is
in the incorrect position.

Changing a programme

After the successful start of a pro-
gramme it is no longer possible to
change the programme.

Содержание WCH 360 SpeedCare 1600





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды