Miele WCG 660, Руководство по эксплуатации

Страница: 22 / 108

Before using for the first time
22
Settings for compartment 
The UltraPhase 2 values are preset in
the standard settings.
After the cartridge has been pushed in,
the display message switches to:
Agent for 
OK





 Confirm with the OK sensor control.
Miele UltraPhase 2
OK





Confirm with the OK sensor control.
The dispensing quantity for
UltraPhase 2 is preset for
 (hardness
level II) .
Per load
OK




ml 45
 Confirm the preset value with the
OK sensor control. If you want to
change this value, use the
 sensor controls and confirm with
the OK sensor control.
UltraPhase 2
 Hardness level I 36 ml

Hardness level II 45 ml
 Hardness level III 54 ml
The following will appear in the display:
 Insert 
 Remove the film from the detergent
cartridge.

Push the UltraPhase 2 detergent
cartridge into compartment 2 until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
 "TwinDos" is set. Can be changed in "Set-
tings".

Confirm with the OK sensor.

Close the TwinDos access panel.