4. Select programme settings
28
Delay start/SmartStart
Delay start
With the delay start function, you can
delay the start of the programme.
This function is active when the set-
ting
SmartGrid
is switched off.
The hours can be set from
00
to
24
.
The minutes can be set in 15 minute in-
crements from
00
to
45
.
Setting the delay start time
Touch the
sensor control.
The following will appear in the display:
Start in
OK
h
:00
00
Set the hours with the
sensor
controls. Confirm with the
OK
sensor
control.
The display will change:
Start in
OK
h
00
06:
Set the minutes with the
sensor
controls. Confirm with the
OK
sensor
control.
Tip:
The values will count upwards and
downwards automatically if you keep
your finger on the
sensor control.
Cancelling delay start
The selected delay start period can be
cancelled before the programme starts.
Touch the
sensor control.
The selected delay start period will ap-
pear in the display.
Set a time value of
00:00
h
with
the
sensor controls. Confirm
with the
OK
sensor control.
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start period can only be
changed or cancelled by interrupting
the programme.
Altering delay start
The selected delay start time period can
be changed before the programme
start.
Touch the
sensor control.
Change the specified time and con-
firm with the
OK
sensor control.
Содержание WCG 360
Страница 100: ...M Nr 11 653 540 01 en GB WCG 360 ...