![Miele WCE 670 Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/miele/wce-670/wce-670_operating-instructions-manual_237668022.webp)
Before using for the first time
22
Settings for compartment
The UltraPhase 2 values are pre-set in
the standard settings.
After the UltraPhase 1 cartridge has
been pushed in, the display message
switches to:
Agent for
OK
Confirm with the
OK
sensor.
Miele UltraPhase 2
OK
Confirm with the
OK
sensor.
The dispensing quantity for
UltraPhase 2 for
(hardness range I)
is pre-set.
Per load
OK
ml
36
Confirm the pre-set value with the
OK
sensor or correct the value with the
sensors and confirm this with the
OK
sensor.
UltraPhase 2
Hardness level I
36 ml
Hardness level II
45 ml
Hardness level III
54 ml
The following appears in the display:
Insert
Remove the foil or the stopper from
the detergent cartridge.
Push the
UltraPhase 2
detergent
cartridge into
compartment 2
until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
"TwinDos" is set. Can be changed in
'Settings'
Confirm with the
OK
sensor.
Close the TwinDos access panel.
Содержание WCE 670
Страница 100: ...M Nr 11 010 861 01 en AU NZ WCE 670 ...