Miele WCE 660 Скачать руководство пользователя страница 63

Страница: 63 / 100

Problem solving guide

Fault message at the end of a programme

Problem

Cause and remedy



Check dosage

Excessive foam has built up during washing.



With TwinDos, check the dosage amount set.



Reduce the amount set in 10 % increments.



Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.



Hygiene info: run a
programme at min.
75 °C or the "Clean
machine"
programme

A wash programme using a temperature above 60 °C
has not been run for a long time.



Turn the programme selector to

Further

programmes





Touch the



sensors until

Maintenance

appears

in the display.



Touch the

sensor to confirm.

The following appears in the display:

Clean machine



Touch the

sensor to confirm.



Run the

Clean machine

programme using Miele

machine cleaner or a universal powder detergent.

This will clean the washing machine and prevent a
build-up of bacteria and odours.



Align the washing
machine

The

Pre-ironing

extra option which runs at the end of

the programme could not be carried out properly.



Check whether the washing machine is aligned
correctly as described in “Installation and
connection – Levelling the machine”.



Check whether the maximum delivery head of 1 m
has been exceeded.

If the fault message appears again, contact Miele.
The washing machine can still be used, however
without the

Pre-ironing

extra option.

The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the

sensor.

Содержание WCE 660





































































































Результаты поиска

Содержание WCE 660

Отзывы:

Похожие инструкции для WCE 660

Бренды по названию

Популярные бренды

Miele WCE 660, Руководство по эксплуатации

Результаты поиска

Содержание WCE 660

Отзывы:

Похожие инструкции для WCE 660

Бренды по названию

Популярные бренды