Programmable functions
79
The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
The programming is carried out in eight
steps (
,
,
...
) using the sensor
controls.
Accessing the programming level
Pre-requisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the
Start
/
Add laundry
sensor
and leave your finger on it whilst
carrying out steps
-
.
Close the washing machine door.
Wait until the
Start
/
Add laundry
sensor
lights up constantly ...
... and then take your finger off the
Start
/
Add laundry
sensor.
After approx. four seconds,
will light
up in the time display.
Choosing and selecting a
programmable function
The number of the programmable
function will appear in the time display
as
and a number: e.g.
.
Touch the
or
sensor control to
scroll to the next or previous
programmable function:
Programmable functions
Keypad tone
PIN code
Control field switch-off behaviour
Memory
Additional long pre-wash – Cottons
Gentle action
Reduced temperature
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Display brightness dimmed
TwinDos
Dosage quantity UltraPhase 1
Dosage quantity UltraPhase 2
TwinDos maintenance
Degree of soiling
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching the
Start
/
Add
laundry
sensor control.
Содержание WCD660 WCS
Страница 92: ......
Страница 93: ......
Страница 94: ......
Страница 96: ...M Nr 11 613 230 03 en SG WCD 660 ...