Miele W 902, Руководство по эксплуатации

Страница: 20 / 52

Programme sequence
COTTONS MINIMUM IRON DELICATES
Soak optional optional optional
Pre-wash optional optional optional
Main wash
X X X
Top-up rinse from 75°C – –
Graduated rinsing – from 50°C from 50°C
No. of rinses – normal 3 oder 4
1)
3 3
– part load 2 3 3
– short wash 2 2 3
Rinse & interim spin (rpm) max. 1000 max. 500 –
Final spin (rpm) max. 1300 max. 900 max. 600
Anti-crease spin & loosen max. 30 mins max. 30 mins max. 30 mins
Rinse hold optional optional optional
Without final spin optional optional optional
Wash rhythm normal normal gentle action
Water level – Wash
– Rinse
low
2)
low
2)
low
2)
medium
2)
high
high
Notes:
X
programme section available
– Programme section not available
1)
A 4th rinse
automatically switches in if there is too much foam in the drum, or if a spin speed lower
than 800 rpm has been selected.
2)
Increasing the water level:
The water level can be increased from a low level to a higher level by pressing the “Water plus” button.
3)
Top-up rinse:
Additional water flows into the drum, and the suds are cooled slightly. Hot water might damage plastic
drain pipes.
Graduated rinsing:
The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter-
vals. This minimises the danger of creasing, by avoiding sudden temperature changes.
WOOLLENS:
Wool is susceptible to damage from movement when it is wet. Drum movement times during the pro-
gramme are shorter, and the drum rotates more slowly.
Programme sequence
20