With the help of the following notes minor faults in the performance of the appli-
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suit-
ably qualified person in accordance with local and national safety regulations.
Unauthorised repairs could be dangerous.
The chart is divided into the following sections to help you:
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
The programme does not start.
What to do if . . .
Possible cause
Remedy
The Anti-crease/Fin-
ish indicator light is
not on, or the START
indicator light is not
flashing.
There is no power.
Check that
–
the door is properly closed.
–
the mains plug is plugged in.
–
the fuse or circuit breaker has
not tripped.
The programme does
not start when Spin
has been selected.
The washing ma-
chine has not been
prepared for using
for the first time.
Prepare the machine as de-
scribed in "Before using for the
first time".
At the end of one
programme you can-
not start the next
programme.
The programme se-
lector has not been
turned past the
Finish
postion.
Turn the programme selector to
the
Finish
postion and then to the
programme you want to run.
Problem solving guide
44