The following fault message appears in the display at the end
of a programme
Fault message
Possible cause
Remedy
Check hot water
inlet
The water inlet of the
second hose (marked
red) is blocked.
The washing machine
washed in the cold water
mode.
Check whether
– the tap has been turned on
properly.
– the inlet hose is kinked.
– the water pressure is too low.
Chk detergent
Excessive foam has built
up during washing.
Check:
– the amount of detergent
used.
– Adjust the dosage according
to the manufacturer's
instructions on the
packaging and the degree of
soiling of the laundry.
Hygiene information
A programme of at least
60°C has not been run for
a long period of time.
Run the
Cottons 75°C
programme with a universal
detergent to prevent the
formation of organic deposits
and unpleasant odours in the
machine.
Problem solving guide
52