Miele W 3923 WPS Скачать руководство пользователя страница 69

Страница: 69 / 72

Standby display

To save energy, the display goes out
the indicator light for the

Start/Stop

button will start flashing slowly.

The display will always go out,

– if a programme is not selected within

10 minutes of the machine being
switched on.

– 10 minutes after the end of a

programme.

Pressing one of the buttons switches
the display back on again.

You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.

The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.

Not in current programme

(the machine is delivered with this
option selected)

The standby function is switched off.
The display will remain visible during a
programme.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.

When this programme is chosen again
these settings will appear in the display.

The machine is delivered with the
memory function deactivated.

A tick

will appear beside the option

to show that it has been set.

To close the Settings menu

Settings

Back

Continue

Press the right hand

button

under

Settings menu

Содержание W 3923 WPS









































































Результаты поиска

Содержание W 3923 WPS

Отзывы:

Бренды по названию

Популярные бренды

Miele W 3923 WPS, Руководство по эксплуатации

Результаты поиска

Содержание W 3923 WPS

Отзывы:

Бренды по названию

Популярные бренды