background image

Energy and water consumption

– Water consumption and energy

usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.

– Use the

Automatic

and

Express

programmes for small loads.

– When smaller amounts of laundry are

washed using the

Cottons

programme, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.

– Using the

Cottons 60°C

programme

instead of the

Cottons 95°C

programme will give energy savings
of between 35% and 45%. This is
sufficient for most levels of soiling.
For stubborn or old stains, use the

Soak

extra option.

Detergent

– Do not exceed the amounts of

detergent recommended by the
manufacturer on the packaging.

– Adjust the dosage to the degree of

soiling of the laundry.

– Reduce the amount of detergent for

smaller loads. Use the

Load/

Detergent

button.

Choosing the correct Extra option
(Short, Soak, Pre-wash)

Select:

– A wash programme together with the

Short

extra option for light to normal

soiling where there are no obvious
marks.

– A wash programme without any extra

options for normal to heavy soiling
with visible staining.

– A wash programme together with the

Soak

extra option for heavily soiled

laundry.

– The

Pre-wash

extra option for laundry

with large amounts of dirt (e.g. dust,
sand).

When drying with a tumble dryer

– Selecting the highest possible spin

speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.

Washing environmentally and economically

15

Содержание W 3922 WPS









































































Отзывы: