Miele W 3652 WPS Скачать руководство пользователя страница 37

Страница: 37 / 68

Fault messages in the display

Problem

Possible cause

Remedy

Fault
Check drainage
system

–

The water outlet is
blocked or
restricted.

–

The drain hose has
been fixed too high.

–

Clean the drain filter and
the drain pump.

–

The maximum drain
height is 1 m.

Fault
Water intake
Open stopcock

–

The water inlet is
blocked or
restricted.

Check whether

–

the stopcock is opened
wide enough.

–

the inlet hose is kinked.

Waterproof
activated
Close stopcock

The water protection
system has reacted.

Call the Service
Department.

Fault
Drum lighting

The drum lighting is
not locked in position.

Check that the drum
lighting is sitting correctly.

Technical fault
Call the Service
Department

There is a fault.

Start the programme again.

If the fault message
appears again, contact the
Service Department.

The following will flash in
the display:

Anti-crease

alternately with

Check detergent

Excessive foam has
built up during
washing.

Use less detergent next
time and follow the
manufacturer's instructions
on dosage given on the
packaging.

To switch off the fault message: Switch the washing machine off with

I-On/0-Off

button.

Problem solving guide

Содержание W 3652 WPS





































































Результаты поиска

Содержание W 3652 WPS

Отзывы:

Miele W 3652 WPS, Руководство по эксплуатации, Страница: 37 / 68

Результаты поиска

Содержание W 3652 WPS

Отзывы: