Miele W 2859i WPM SUPERTRONIC, Руководство по эксплуатации

Страница: 55 / 88

Problems with the load size indicator
Problem Possible cause Remedy
The display indicates a
load of
<25%
or no load
size is indicated when
the drum is full.
There was already
laundry in the drum
when the washing
machine was switched
on. This has
decalibrated the
sensor from the zero
setting.
^
To recalibrate the sensor
to the zero setting:
– Remove the laundry from
the drum and leave the
door open.
– Switch off the washing
machine.
– Switch on the washing
machine.
– In the Settings menu
select Load sensor zero
setting .
– Activate the option.
The sensor will be
recalibrated to the zero
setting.
The display indicates a
load of
25%
,
50%
,
75%
or
100%
when the drum
is empty.
The load size sensor
has been decalibrated
from the zero setting. Rotate the drum once. If the
display still indicates a load
of
25%
,
50%
,
75%
or
100%
,
recalibrate the sensor to
zero again (see above
section).
Problem solving guide
55