Miele W 2514 WPS, Руководство по эксплуатации

Страница: 35 / 68

The wash programme stops and a fault indicator light comes
on.
Problem Possible cause Remedy
A
The buzzer sounds and
the Drain CHECK light
flashes. "– – –" appears
in the display. The water outlet is
blocked or restricted. Clean the fluff filter and the
drain pump as described in
"Problem solving guide –
Opening the door in the
event of a blocked drain
outlet or a power failure".
The drain hose has
been fixed too high. The maximum drain height is
1 m.
The buzzer sounds and
the Inlet CHECK light
flashes. "– – –" appears
in the display. The water inlet is
blocked or restricted. Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
The filter in the water
inlet hose is dirty. Clean the filter.
The buzzer sounds and
the Inlet and Drain
CHECK light flash.
"– – –" appears in the
display. The Miele Waterproof
system has reacted. Call the Service Department.
The buzzer sounds and
the Soak or Rinses
SEQUENCE indicator
lights flash. "– – –"
appears in the display. There is a fault. Start the programme again.
If the fault message appears
again, contact the Service
Department.
A
To delete the fault message: Switch the washing machine off with the I-On/0-Off
button.
Cleaning and care
35