I
Adding detergent
It is important to dispense the correct
amount, because. . .
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to the
laundry.
– Limescale deposits on the heater
elements.
. . . too much detergent results in:
– Excessive foam, which causes a low
level of agitation and poor wash,
rinse and spin results.
– higher water consumption because
an extra rinse is automatically
activated
– A burden to the environment.
^
Pull out the detergent drawer and
place detergent in the compartments
as follows:
i
Pre-wash (if selected, add
1
/
3
of the
total amount recommended for the
programme). This compartment is
also used for starch formulations
when starching separately.
j
Main wash including the Soak period
if selected
§
Fabric conditioner or liquid starch.
^
Close the detergent drawer.
See section on "Detergent" for further
information on detergent and the
amount to dispense.
J
Press the Start button
This starts the programme. The
maximum programme duration will then
show in the display.
How to wash correctly
24
Содержание W 2209I
Страница 63: ...Programmable functions for changing standard settings ...
Страница 70: ...70 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 2606 W 2209i M Nr 06 240 450 01 en GB ...