With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
You should, however, note the following:
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The chart is divided into the following sections to help you:
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– Problems with opening/closing or a "buzzing" sound
The programme does not start.
Problem
Possible cause
Remedy
The Anti-crease/Finish
indicator light is not on,
or the Start indicator
light is not flashing.
There is no power to the
machine.
Check whether
–
the mains plug is
plugged in and
switched on.
–
the fuse or circuit
breaker has tripped.
The programme does
not start when
Drain/Spin has been
selected.
The washing machine
has not been prepared
for using for the first time.
Prepare the machine as
described in "Before
using for the first time".
The Excess detergent
check light is flashing
rapidly and the
programme does not
start.
The inner lid is not
closed.
Open the outer lid and
close the inner lid
properly (the inner lid lock
must engage properly).
Problem solving guide
38
