Miele W 1611 Скачать руководство пользователя страница 21

Страница: 21 / 64

Automatic

cold to 40°C

Max. load 3.5 kg

Fabric

Mixed loads of garments suitable for the

Cottons

and

Minimum iron

programmes. Sort according to colour.

Note

The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.

Shirts

cold to 60°C

Max. load 2.0 kg

Note

Pre-treat collars and cuffs if necessary.

Wash silk garments on the

Delicates

programme.

Denim

cold to 60°C

Max. load 3.0 kg

Note

Wash denim inside out.

Denim often contains excess dye and will run during the first few
washes. Wash light and dark coloured items separately.

Dark garments

cold to 40°C

Max. load 3.0 kg

Fabric

Dark garments made from cotton or mixed fibres.

Note

Wash inside out.

Spin

Note

Drain only: Select

Make sure you select the appropriate spin speed.

Programme chart

Содержание W 1611

































































Результаты поиска

Содержание W 1611

Отзывы:

Miele W 1611, Руководство по эксплуатации, Страница: 21 / 64

Результаты поиска

Содержание W 1611

Отзывы: