Miele W 1512, Руководство по эксплуатации

Страница: 19 / 60

Final spin speed
Programme rpm
Cottons 1200
Minimum iron 1200
Delicates 600
Woollens 1200
Express 1200
Automatic 1200
Shirts 600
Denim 900
Dark garments 1200
Spin 1200
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons
programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold/
e
)
^
Select the Rinse hold/
e
setting
using the
Spin speed
button. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop button.
– To end the programme:
Press the Door button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin (No
u
)
^
Select the
No
u
setting using the
Spin speed button. The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cottons , Minimum iron , Express and
Automatic
programmes.
Spinning
19