manualshive.com logo in svg

Miele TWR 780 WP, Руководство по эксплуатации

Поделиться
Скачать
Miele TWR 780 WP Скачать руководство пользователя страница 76

Problem solving guide

76

Cleaning the fluff filter in the
condensed water container

When certain programmes are being
used, water is taken from the
condensed water container and
sprayed into the drum. The spray jet
can sometimes stop working. The fluff
filter in the condensed water container
is clogged.

Pull out the condensed water
container.

Reach under the side lug on the
spout with your finger.

Pull out the spout.

Be careful not to tug on the hose to
avoid detaching it.

Guide the end of the hose through
the opening.

Hold it securely with one hand.

Use your other hand to pull the fluff
filter off the hose.

Rinse the fluff filter with a jet of water
until all the fluff has been removed.

Attach the clean fluff filter to the end
of the hose.

Now feed the hose back into the
condensed water container.

Refit the spout in the condensed
water container ensuring that it is
positioned correctly. Please refer to
the image.

Содержание TWR 780 WP













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды