manualshive.com logo in svg

Miele TWB 120 WP, Руководство по эксплуатации

Поделиться
Скачать
Miele TWB 120 WP Скачать руководство пользователя страница 31

Changing the program sequence

31

Changing a program once it
has started

You cannot change to another program
once a program has started (this
prevents unintentional alterations).

If you try to change a program, 



 will

light up until the original program is
reset.
Exception: The dryer is switched off by
turning the program selector to the 

position.

You will need to cancel the current
program before you can select a new
one.

Risk of fire due to incorrect use

and operation.
The laundry can burn and destroy
the dryer and the surroundings.
Read and observe “IMPORTANT
SAFETY INSTRUCTIONS”.

Cancelling the current program

Touch the 

Start/Stop

 sensor button.

The items will be cooled down,
depending on the temperature reached
and how long they have been dried for. 



 will light up if you press the 

Start/

Stop

 sensor button again during the

cooling-down phase.

Open the door.

If you would like to select another
program

You can also directly cancel a running
drying program if you immediately
select another program and start it.

Turn the program selector to 

.

Turn the program selector to another
program.

Touch the 

Start/Stop

 sensor button.

Adding or removing laundry

Bear in mind that hot steam may

escape when the door is opened.

Pull open the door.

Add or remove items.

Close the door.

Touch the 

Start/Stop

 sensor button.

The program starts.

Содержание TWB 120 WP

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды