Miele Triflex HX1 Cat&Dog SMML0, Руководство по эксплуатации

Страница: 46 / 68

16
Connecting the Comfort handle
Depending on how you decide to con-
figure your vacuum cleaner, you can
connect the Comfort handle to either
the suction tube or the PowerUnit.
 Push the Comfort handle down onto
the suction tube connector from
above until it audibly clicks into place
(left image detail).

Slide the Comfort handle along the
guide line on the dust container
handle and down onto the PowerUnit
connector from above until it audibly
clicks into place (right image detail).
 Switch off the vacuum cleaner using
the On/Off switch on the front of the
Comfort handle if you want to separ-
ate the sections.
 Press the release catch and remove
the Comfort handle by pulling it up-
wards.
Connecting the PowerUnit and the
suction tube
Depending on how your vacuum
cleaner is configured, the suction tube
is located either above or below the
PowerUnit.
 Slide the suction tube along the guide
line on the dust container handle and
down on to the PowerUnit connector
from above until it audibly clicks into
place (left image detail).